Publications
Journal articles
Abstract
Cell migration is a fundamental physiological process essential from embryogenesis to cancer metastasis. It is primarily governed by the coupled mechanics of the plasma membrane (PM) and the nucleus, together with cytoskeletal dynamics. Being the largest and stiffest organelle, the nucleus is considered a rate-limiting factor in confined migration. However, nuclear positioning varies across cell types and migration modes, and the forces orchestrating its mechanical coupling with the PM are not completely understood. In recent decades, mathematical modelling has gained relevance to support cell migration research, yet models face the fundamental challenge of balancing mechanistic detail with computational efficiency. Here, we develop a dimensionless, biophysically grounded model based on geometric surface partial differential equations (GS-PDEs) for cell migration. This approach benefits from dimensional reduction—the PM and the nuclear envelope (NE) are modelled as energetic geometric membranes—and is solved using the evolving surface finite element method (ESFEM), balancing mechanistic detail with computational feasibility. The model reproduces experimentally observed migration patterns: exhaustion of lipid reservoirs and nuclear–lamina unfolding limit PM and NE surface area, blocking cell passage through constrictions; nuclear velocity peaks upon pore exit; and nuclear movement alternates between pulling and pushing regimes. Moreover, the modelling approach makes key predictions: the velocity peak upon nuclear pore exit is driven by the release of the curvature-elastic energy stored as membrane tension at the NE rear, and PM–NE mechanical coupling can hinder cell translocation, since part of the locomotion energy is invested in nuclear positioning. The model quantifies forces that are not easily experimentally accessible, including membrane tension, bending energy, osmotic pressure, PM–NE elasticity, and contact forces, offering an interpretable platform to test and propose mechanistic hypotheses on confined cell migration.
Abstract
The basement membrane is a specialised nanoporous extracellular matrix mainly composed of collagen IV fibres and laminins. As collagen IV fibres form covalent cross-links, cells cannot freely cross it. Basement membrane breaching marks the transition from in situ to invasive carcinoma, commonly attributed to protease activity. Yet, recent data show that tumour cells can cross basement membranes through protease-independent mechanisms. Experimental evidence suggests that filopodia can play an active role in pore enlargement in extracellular matrices by generating plastic mechanical deformation. Moreover, plasticity can be regulated by covalent cross-link concentration, which we hypothesise can be responsive to collagen IV turnover, thus generating transient weak spots. To test this, we developed a quantitative, biophysical mathematical model describing the interaction between a tumour-cell cluster and a basement membrane using relevant biological assumptions and parameters. The cluster is represented as an evolving, energetic surface and the basement membrane is described as a set of points representing active and inactive links. Simulations show that synchronisation of collagen IV turnover coupled with filopodium extension drives pore enlargement, providing a mechanistic basis for protease-independent invasion. Consistent with experiments, simulations identify two complementary filopodium groups: one driving global degradation and the other promoting local pore enlargement.
Abstract
In both biological and human-made mechanical systems, contact interfaces play a crucial role in transferring power. Although their lifespan is enhanced by uniform contact pressure distribution, designing shapes achieving this remains challenging, especially under time-dependent loads. Contrarily, synovial joints are adapted to withstand severe and time-dependent loads. This adaptation is driven by two key principles: shear stress promotes ossification, while hydrostatic pressure promotes proliferation. This study analyses the response of a generative design algorithm for contact problems based on these principles embedded into a growth rule. By varying material stiffness, initial conditions, and loading scenarios, the algorithm successfully adapts contact interfaces for both time-independent and time-dependent loads. The results demonstrate that the growth principles lead to almost uniform contact pressure under time-independent loads, up to 34.7% more uniform than reference shapes. Under time-dependent loads, it generates shapes with reduced maximum shear stress and contact pressure (up to 73%) with respect to initial shapes. Unlike other methods, such as optimisation techniques, this approach does not seek a specific contact interface where pressure is well-distributed. Instead, the development of well-distributed pressure is an intrinsic part of the growth function. Hence, the algorithm provides a family of contact interfaces exhibiting uniform contact pressure whose shape depends on the development time. Additionally, the growth rule is easier to compute than gradients for gradient-based optimisation, and, in contrast to heuristic optimisation techniques, only one direction of change is necessary. Thus, this bio-inspired approach provides a viable alternative for shape optimisation problems in contact mechanics.
Abstract
In this work, we present a mechanobiochemical model for two-dimensional cell migration which couples mechanical properties of the cell cytosol with biochemical processes taking place near or on the cell plasma membrane. The modelling approach is based on a recently developed mathematical formalism of evolving bulk-surface partial differential equations of reaction–diffusion type. We solve these equations using finite element methods within a moving-mesh framework derived from the weak formulation of the evolving bulk-surface PDEs. In the present work, the cell cytosol interior (bulk) dynamics are coupled to the cell membrane (surface) dynamics through non-homogeneous Dirichlet boundary conditions. The modelling approach exhibits both directed cell migration in response to chemical cues as well as spontaneous migration in the absence of such cues. As a by-product, the approach shows fundamental characteristics associated with single cell migration such as: (i) cytosolic and membrane polarisation, (ii) actin dependent protrusions, and (iii) continuous shape deformation of the cell during migration. Cell migration is an ubiquitous process in life that is mainly triggered by the dynamics of the actin cytoskeleton and therefore is driven by both mechanical and biochemical processes. It is a multistep process essential for mammalian organisms and is closely linked to a vast diversity of processes; from embryonic development to cancer invasion. Experimental, theoretical and computational studies have been key to elucidate the mechanisms underlying cell migration. On one hand, rapid advances in experimental techniques allow for detailed experimental measurements of cell migration pathways, while, on the other, computational approaches allow for the modelling, analysis and understanding of such observations. The bulk-surface mechanobiochemical modelling approach presented in this work, set premises to study single cell migration through complex non-isotropic environments in two- and three-space dimensions.
Abstract
Additive manufacturing facilitates the materialization of complex designs, e.g. bio-inspired non-assembly joints. Despite the advantages of this type of joints, such as single-step manufacturing, their performance under operational conditions remains poorly understood. This paper explores the design, fabrication and wear performance of a hinge-type joint inspired by the camel elbow. The joint was fabricated by metal additive manufacturing and its wear behaviour was numerically and experimentally evaluated. The results show that the bio-inspired design performs better than a cylindrical one in terms of wear distribution. This work helps to better understand the wear performance of non-assembled bio-inspired joints.
Abstract
In this article, a bio-mimetic approach to the generative design of contact interfaces with uniform pressure distribution is explored. During the morphogenesis process, biological joints grow depending on the states of stress generating a shape adapted to the mechanical loads. This adaptation is driven by two main rules: shear stress inhibits growth, whereas cyclic hydrostatic compressive stress promotes it. In this work, we demonstrate that the stress-dependent growth rules of synovial joint morphogenesis can be applied to generate contact interfaces with uniform pressure in engineering applications. For that, we present a mathematical model that comprises a contact formulation and a bio-inspired growth function; the model is solved numerically using finite element methods. We analyse the impact of the growth rules of synovial joint development on the contact pressure distribution of two-dimensional contact interfaces. We study the parameter space of the bio-inspired growth function to fine-tune the model parameters. The model is tested in several cases with different boundary conditions and material properties. The results show that the proposed generative design process leads to contact interfaces that provide uniform contact pressure. A quantitative metric of the uniformity of the contact pressure is also defined. This metric indicates that the bio-inspired process generates geometries as good as those obtained with other methods present in the literature without the need of an initial shape close to the final one. Thus, this work demonstrates that synovial joint morphogenesis can be adapted for generative design in engineering.
Abstract
The purpose of this article is to study Turing pattern formation in one- and two-dimensional domains under heterogeneous distributions of the parameters for an activator-depleted model. Unlike previous studies of this nature, the choice of the heterogeneous distributions of the parameters is closely linked and estimated by use of rigorous wave mode selection in order to excite different modes in different subsets of the domains. This allows us to relate the numerical solutions with theoretical linear stability analytical results. Our most revealing results show that the wave modes of adjacent subsets evolve locally and yet possess continuity across the interface. These local patches of the solutions result in a globally heterogeneous solution stable only in the presence of heterogeneous distributions of the parameters. Furthermore, our results show that initial conditions continue to play a crucial role in the selection of excitable wave modes and consequently the formation of the inhomogeneous patterns formed. In particular, initial conditions influence pattern orientation and polarity, and yet with a prepattern, the patterns conserved orientation and polarity. Numerical solutions are obtained by the use of the finite element method and the backward Euler scheme to deal with the spatial and the time discretisations, respectively.
Conference proceedings
Abstract
Synovial joints are known by their resistance to wear as they can withstand millions of load cycles. Such performance is attributed to the development process where joints are adapted to the loading environment. In engineering applications, wear is frequently a cause of failure. Classical joint design usually leads to uneven pressure distribution, accelerating wear in concentrated regions. In this work, we use a bio-inspired design methodology to generate contact interfaces. The key point of this methodology is the use of the growth rules of synovial joint during development. Specifically, hydrostatic stress promotes growth and high shear stress inhibits it. We apply these rules in an iterative algorithm to generate contact interfaces adapted to the loading environment. We present a case study to generate the shape of body in frictionless contact with an elastic half space using the bio-inspired approach. We compare the pressure and wear distribution between the bio-inspired and classical designs. The results highlight that the bio-inspired methodology produces almost uniform contact pressure and wear distribution, in contrast to the concentration inherent in classical designs. Thus, this study accentuates the potential advantages of this bio-inspired methodology, offering a compelling avenue for achieving high-performance contact interfaces.
